当前位置：首页 > news >正文

朝花夕拾 -- AES(1)

news 2025/10/26 18:50:36

AES(1)

零、前言

朝花夕拾杯中酒。从CTF开始攻击CBC模式下的加密漏洞，再到第四学期的《密码学基础》课程，时至今日，《密码工程》课程的需要以及自己对于对称密码的兴趣驱使，下定决心写下这篇笔记记录自己对于AES的认识以及学习。这篇文章工期拖得比较长，一方面是因为自己的拖延症，二是针对于密码学的工程应用以及编码硬实力的不足，自己翻阅了很多师傅的相关资料，也翻阅了部分教材和相关资料，会在结尾进行指明。由于作者本人的实力与阅历不足，本文在内容、专业知识、排版以及语法表达上或多或少存在错误，请读者仔细辨别并积极指出交流。很庆幸完成了这篇笔记。😊😊

一、AES背景介绍

$1997$年$9$月，美国国家标准与技术研究院$NIST$公开征集新的高级加密标准$(Advanced Encryption Standard, AES)$，取代$DES$算法.$1998$年$6$月，提交过程截至，共收到$21$个算法.经过简单筛选，$1998$年$8$月，公开来自$12$个国家的$15$个候选算法进入第一轮.$1999$年$8$月，$5$个候选算法进入第二轮，分别是$MARS$、$RC6$、$Rijndael$、$Serpent$和$Twofish$算法.$2000$年$10$月，由比利时密码学家$Daemen$和$Rijmen$共同设计的$Rijndael$算法获胜，经过讨论和规范后，于$2001$年$12$月作为$NIPS 197$发布，成为高级加密标准$AES$。

$AES$算法采用$SPN$结构，分组长度为$128-bit(16-Byte)$.将输入按照字节划分，从$0$到$15$标号，并按照下图所示的顺序排列

0	4	8	12
1	5	9	13
2	6	10	14
3	7	11	15

$AES$算法共有三个版本，对应不同的密钥长度和安全强度：当密钥长度为$128-bit$时，迭代轮数为$10$轮；当密钥长度为$192-bit$时，迭代轮数为$12$轮；当密钥长度为$256-bit$时，迭代轮数为$14$轮，分别标记为$AES-128/192/256$.

本文将介绍$AES$的内部结构、$AES$加密、解密算法的各种编程语言实现、$AES$的各种工作模式、$AES$的优化策略以及优化结果展示。

二、内部结构

$AES$为分组对称密码，针对于其内部结构而言，每轮加密/解密由（逆）字节代换、（逆）行移位、（逆）列混合、轮密钥加四部分组成。所谓分组，即将需要加密的明文$message$以$128-bit$分成组别，每一组都经过$10/12/14$轮上述的四部分操作进行加密。假设$message = b'abcdefghijklmnopqrstuvwxyz'$，那么$block0=b'abcdefghijklmnop',bloc1='qrstuvwxyz'$，而$block1$由于内容并不够$128-bit$，所以我们需要进行填充，即$block1=b'qrstuvwxyz\x00\x00\x00\x00\x00\x00'$。注意，$AES$使用的四个组件都是可逆的，针对于解密而言，就是高度对称下的逆向组件的使用，接下来我们将从加密和解密中所用到的四个组件进行详细介绍。

为了方便$AES$的展示和实现，我们通过状态矩阵来展示一个分组的加密或解密的详细过程，例如$block0$会根据先列后行的顺序被分配到状态矩阵中进行后续的组件操作。

a	e	i	m
b	f	j	n
c	g	k	o
d	h	l	p

针对于明文信息，我们需要按照字节对应为相应的ASCII码进行后的加密/解密操作。

0x61	0x65	0x69	0x73
0x62	0x66	0x70	0x74
0x63	0x67	0x71	0x75
0x64	0x68	0x72	0x76

1. 字节代换

字节代换

所谓字节代换，其实就是一个查表操作，而这里的表，我们称之为$S盒$。
$AES$的$S盒$

行/列	0	1	2	3	4	5	6	7	8	9	A	B	C	D	E	F
0	0x63	0x7c	0x77	0x7b	0xf2	0x6b	0x6f	0xc5	0x30	0x01	0x67	0x2b	0xfe	0xd7	0xab	0x76
1	0xca	0x82	0xc9	0x7d	0xfa	0x59	0x47	0xf0	0xad	0xd4	0xa2	0xaf	0x9c	0xa4	0x72	0xc0
2	0xb7	0xfd	0x93	0x26	0x36	0x3f	0xf7	0xcc	0x34	0xa5	0xe5	0xf1	0x71	0xd8	0x31	0x15
3	0x04	0xc7	0x23	0xc3	0x18	0x96	0x05	0x9a	0x07	0x12	0x80	0xe2	0xeb	0x27	0xb2	0x75
4	0x09	0x83	0x2c	0x1a	0x1b	0x6e	0x5a	0xa0	0x52	0x3b	0xd6	0xb3	0x29	0xe3	0x2f	0x84
5	0x53	0xd1	0x00	0xed	0x20	0xfc	0xb1	0x5b	0x6a	0xcb	0xbe	0x39	0x4a	0x4c	0x58	0xcf
6	0xd0	0xef	0xaa	0xfb	0x43	0x4d	0x33	0x85	0x45	0xf9	0x02	0x7f	0x50	0x3c	0x9f	0xa8
7	0x51	0xa3	0x40	0x8f	0x92	0x9d	0x38	0xf5	0xbc	0xb6,	0xda	0x21	0x10	0xff	0xf3	0xd2
8	0xcd	0x0c	0x13	0xec	0x5f	0x97	0x44	0x17	0xc4	0xa7	0x7e	0x3d	0x64	0x5d	0x19	0x73
9	0x60	0x81	0x4f	0xdc	0x22	0x2a	0x90	0x88	0x46	0xee	0xb8	0x14	0xde	0x5e	0x0b	0xdb
A	0xe0	0x32	0x3a	0x0a	0x49	0x06	0x24	0x5c	0xc2	0xd3	0xac	0x62	0x91	0x95	0xe4	0x78
B	0xe7	0xc8	0x37	0x6d	0x8d	0xd5	0x4e	0xa9	0x6c	0x56	0xf4	0xea	0x65	0x7a	0xae	0x08
C	0xba	0x78	0x25	0x2e	0x1c	0xa6	0xb4	0xc6	0xe8	0xdd	0x74	0x1f	0x4b	0xbd	0x8b	0x8a
D	0x70	0x3e	0xb5	0x66	0x48	0a03	0xf6	0x0e	0x61	0x35	0x57	0xb9	0x86	0xc1	0x1d	0x9e
E	0xe1	0xf8	0x98	0x11	0x69	0xd9	0x8e	0x94	0x9b	0x1e	0x87	0xe9	0xce	0x55	0x28	0xdf
F	0x8c	0xa1	0x89	0x0d	0xbf	0xe6	0x42	0x68	0x41	0x99	0x2d	0x0f	0xb0	0x54	0xbb	0x16

状态矩阵中的元素按照下面的方式映射为一个新的字节：把该字节的高$4$位作为行值。低$4$位作为列值，去除$S盒$或者$逆S盒$中对应的行的元素作为输出。例如，加密时，输出的字节$S1=b'0x12'$，则查$S盒$的第$0x01行$和$0x02列$，得到值$0xc9$，然后替换$S1$原有的$0x12$为$0xc9$。

逆字节代换

操作步骤与实现过程与$S盒$一直，是字节代换的逆操作，一般称之为$逆S盒$。
$AES$的$逆S盒$

行/列	0	1	2	3	4	5	6	7	8	9	A	B	C	D	E	F
0	0x52	0x09	0x6a	0xd5	0x30	0x36	0xa5	0x38	0xbf	0x40	0xa3	0x9e	0x81	0xf3	0xd7	0xfb
1	0x7c	0xe3	0x39	0x82	0x9b	0x2f	0xff	0x87	0x34	0x8e	0x43	0x44	0xc4	0xde	0xe9	0xcb
2	0x54	0x7b	0x94	0x32	0xa6	0xc2	0x23	0x3d	0xee	0x4c	0x95	0x0b	0x42	0xfa	0xc3	0x4e
3	0x08	0x2e	0xa1	0x66	0x28	0xd9	0x24	0xb2	0x76	0x5b	0xa2	0x49	0x6d	0x8b	0xd1	0x25
4	0x72	0xf8	0xf6	0x64	0x86	0x68	0x98	0x16	0xd4	0xa4	0x5c	0xcc	0x5d	0x65	0xb6	0x92
5	0x6c	0x70	0x48	0x50	0xfd	0xed	0xb9	0xda	0x5e	0x15	0x46	0x57	0xa7	0x8d	0x9d	0x84
6	0x90	0xd8	0xab	0x00	0x8c	0xbc	0xd3	0x0a	0xf7	0xe4	0x58	0x05	0xb8	0xb3	0x45	0x06
7	0xd0	0x2c	0x1e	0x8f	0xca	0x3f	0x0f	0x02	0xc1	0xaf	0xbd	0x03	0x01	0x13	0x8a	0x6b
8	0x3a	0x91	0x11	0x41	0x4f	0x67	0xdc	0xea	0x97	0xf2	0xcf	0xce	0xf0	0xb4	0xe6	0x73
9	0x96	0xac	0x74	0x22	0xe7	0xad	0x35	0x85	0xe2	0xf9	0x37	0xe8	0x1c	0x75	0xdf	0x6e
A	0x47	0xf1	0x1a	0x71	0x1d	0x29	0xc5	0x89	0x6f	0xb7	0x62	0x0e	0xaa	0x18	0xbe	0x1b
B	0xfc	0x56	0x3e	0x4b	0xc6	0xd2	0x79	0x20	0x9a	0xdb	0xc0	0xfe	0x78	0xcd	0x5a	0xf4
C	0x1f	0xdd	0xa8	0x33	0x88	0x07	0xc7	0x31	0xb1	0x12	0x10	0x59	0x27	0x80	0xec	0x5f
D	0x60	0x51	0x7f	0xa9	0x19	0xb5	0x4a	0x0d	0x2d	0xe5	0x7a	0x9f	0x93	0xc9	0x9c	0xef
E	0xa0	0xe0	0x3b	0x4d	0xae	0x2a	0xf5	0xb0	0xc8	0xeb	0xbb	0x3c	0x83	0x53	0x99	0x61
F	0x17	0x2b	0x04	0x7e	0xba	0x77	0xd6	0x26	0xe1	0x69	0x14	0x63	0x55	0x21	0x0c	0x7d

2. 行移位

行移位

行移位是一个简单的做循环移位操作，当密钥长度为$128-bit$时，状态矩阵的第一行循环左移$0-Byte$，第二行循环左移$1-Byte$，第三行循环左移$2-Byte$，第四行循环左移$3-Byte$。
设行移位前的状态矩阵为：

S0	S4	S8	SC
S1	S5	S9	SD
S2	S6	SA	SE
S3	S7	SB	SF

行移位后的状态矩阵为：

S0	S4	S8	SC
S5	S9	SD	S1
SA	SE	S2	S6
SF	S3	S7	SB

逆行移位

行移位的逆变换就是将状态矩阵中的每一行执行相反方向的循环移位即可，例如$AES-128$中的状态矩阵的第一行循环右移$0-Byte$，第二行循环右移$1-Byte$，第三行循环右移$2-Byte$，第四行循环右移$3-Byte$。

3. 列混合

列变换 -- 矩阵乘法

列混合变换是通过在$GF(2^8)$上的矩阵相乘来实现的，经过行移位后的状态矩阵与固定的矩阵相乘，得到混淆后的状态矩阵。其中，加法运算$a+b=a \oplus b$，乘法运算$a \cdot b$在模不可约多项式$x ^ 8 + x ^ 4 + x ^ 3 + x + 1$.

\[\begin{bmatrix} s'_{0,0} & s'_{0,1} & s'_{0,2} & s'_{0,3} \\ s'_{1,0} & s'_{1,1} & s'_{1,2} & s'_{1,3} \\ s'_{2,0} & s'_{2,1} & s'_{2,2} & s'_{2,3} \\ s'_{3,0} & s'_{3,1} & s'_{3,2} & s'_{3,3} \end{bmatrix} = \begin{bmatrix} 02 & 03 & 01 & 01 \\ 01 & 02 & 03 & 01 \\ 01 & 01 & 02 & 03 \\ 03 & 01 & 01 & 02 \end{bmatrix} \begin{bmatrix} s_{0,0} & s_{0,1} & s_{0,2} & s_{0,3} \\ s_{1,0} & s_{1,1} & s_{1,2} & s_{1,3} \\ s_{2,0} & s_{2,1} & s_{2,2} & s_{2,3} \\ s_{3,0} & s_{3,1} & s_{3,2} & s_{3,3} \end{bmatrix} \]

列变换 -- GF(0xff)乘法

这里介绍一下在$GF(2^8)$中的乘法运算以及加法运算，其中加法运算就是按位异或的运算，而乘法相对来说有些复杂。首先，在$GF(2 ^ 8)$中每个元素都可以表示为$8次二进制多项式$，形式为：$a(x) = a_7x^7+a_6x^6+a_5x^5+a_4x^4+a_3x^3+a_2x^2+a_1x+1$，其中$a_i\in \{0,1\}$（系数遵循$GF(2)运算规则：$0+0=0,0+1=1,1+1=0,0\cdot0=0,0\cdot1=0,1\cdot1=1$.

对于两个 ${GF}(2^8)$ 元素 $A(x) = \sum_{i=0}^7 a_i x^i$ 和 $B(x) = \sum_{i=0}^7 b_i x^i$，先执行普通多项式乘法（系数运算在 ${GF}(2)$ 下进行）。乘法结果是次数不超过 15 的多项式：$C(x) = A(x) \cdot B(x) = \sum_{k=0}^{15} c_k x^k$.其中 $c_k = \left( \sum_{\substack{i+j=k \\ 0 \leq i,j \leq 7}} a_i b_j \right) \mod 2$（对每个次数 $k$，合并所有 $i+j=k$ 的项，系数模 $2$）。

由于最终结果需要属于$GF(2^8)$，需将$C(x)$对$m(x)=x^8+x^4+x^3+x+1$取模，得到次数＜8的余式。利用模运算性质：因为$m(x)\equiv 0 (mod\ m(x))$，所以$x^8\equiv x^4 + x^ 3 + x + 1 (mod \ m(x))\ \ \ GF(2)$中$-1=1$，故$x ^ 8 = -(x^4+x^3+x+1) \ equiv x ^ 4 + x ^ 3 + x + 1)$。对于更高次幂（如$x^k,k≥8$），可以通过反复替换$x^8$为$x^4+x^3+x+1$来降低次数。例如：

$x ^ 9 \equiv x \cdot x ^ 8 \equiv x \cdot (x ^ 4 + x ^ 3 + x + 1) = x ^ 5 + x ^ 4 + x ^ 2 + x$
$x ^ {10} \equiv x \cdot x ^ 9 \equiv x \cdot (x ^ 5 + x ^ 4 + x ^ 2 + x) = x ^ 6 + x ^ 5 + x ^ 3 + x ^ 2$
以此类推，直到所有次数$≥8$的项都被替换为次数$＜8$的项。

因此，列变换的结果矩阵中的每一列元素与原矩阵的元素之间的关系如下：

\[\begin{align*} s'_{0,j} &= (2 \cdot s_{0,j}) \oplus (3 \cdot s_{1,j}) \oplus s_{2,j} \oplus s_{3,j} \\ s'_{1,j} &= s_{0,j} \oplus (2 \cdot s_{1,j}) \oplus (3 \cdot s_{2,j}) \oplus s_{3,j} \\ s'_{2,j} &= s_{0,j} \oplus s_{1,j} \oplus (2 \cdot s_{2,j}) \oplus (3 \cdot s_{3,j}) \\ s'_{3,j} &= (3 \cdot s_{0,j}) \oplus s_{1,j} \oplus s_{2,j} \oplus (2 \cdot s_{3,j}) \end{align*} \]

$AES$中我们采用位操作快速约简：若乘法结果的多项式含$x^k(k≥8)$，则将结果与$m(x)$左移$k-8$位的多项式异或（对应$GF(2)$的加法）

若结果含$x^8$，则异或$m(x)=x^8+x^4+x^3+x+1$
若含$x^9$，则异或$x \cdot m(x) = x ^ 9 + x ^ 5 + x ^4 + x ^ 2 + x$
重复此过程，知道消去所有次数$≥8$的项。

示例演示

对$a, b \in GF(2 ^ 8)$，$a + b = a \oplus b$， $ 3 \cdot a = 2 \cdot a \oplus a$.记字节$a$按比特表示为$a_7a_6a_5a_4a_3a_2a_1a_0$($a_7$为最高位)对应$GF(2 ^ 8)$中的多项式$a_7x ^ 7 + a_6 x ^ 6 + a_5x^5+a_4x4+a_3x^3+a_2x2+a_1x+a_0$，$2$对应$GF(2 ^ 8)$中的$x$，则$2 \cdot a$可看作：

\[x(a_7x^7+a_6x^6+\cdots+a_1x+a_0)\ \ mod\ (x^8+x^4+x^3+x+1)\\ =a_7x^8+a_6x^7+\cdots+a_1x^2+a_0x\ \ mod\ (x^8+x^4+x^3+x+1)\\ = \begin{cases} a_6x^7+a_5x^6+\cdots+a_1x^2+a_0, & a_7 = 0 \\ a_6x^7+\cdots+(a_3+1)x^4+(a_2+1)x^3+a_1x^2+(a_0+1)x+1, & a_7 = 1 \end{cases}\\ 再将多项式表示成二进制串的形式，2 \cdot a = \begin{cases} a_6a_5\cdots a_1a_00, & a_7 = 0 \\ a_6a_5\cdots a_1a_00 \oplus 00011011, & a_7 = 1 \end{cases}\\ =\begin{cases} a_7a_6a_5\cdots a_1a_0<<1, & a_7 = 0 \\ (a_7a_6a_5\cdots a_1a_0<<1)\oplus 00011011, & a_7 = 1 \end{cases} \rightarrow 2 \cdot a = (a_7a_6a_5\cdots a_1a_0 << 1)\oplus a_7 \cdot (00011011) \]

由此，我们可以看出再加密过程中，列混合矩阵中出现最大的$0x03$我们至多需要两次异或运算与一次左移运算即可完成，也印证了我们前面提到的加密过程中的计算量＜解密时的计算量，加密算法较解密算法而言更加常用。

逆列变换

\[\begin{bmatrix} s'_{0,0} & s'_{0,1} & s'_{0,2} & s'_{0,3} \\ s'_{1,0} & s'_{1,1} & s'_{1,2} & s'_{1,3} \\ s'_{2,0} & s'_{2,1} & s'_{2,2} & s'_{2,3} \\ s'_{3,0} & s'_{3,1} & s'_{3,2} & s'_{3,3} \end{bmatrix} = \begin{bmatrix} 0\text{E} & 0\text{B} & 0\text{D} & 0\text{9} \\ 0\text{9} & 0\text{E} & 0\text{B} & 0\text{D} \\ 0\text{D} & 0\text{9} & 0\text{E} & 0\text{B} \\ 0\text{B} & 0\text{D} & 0\text{9} & 0\text{E} \end{bmatrix} \begin{bmatrix} s_{0,0} & s_{0,1} & s_{0,2} & s_{0,3} \\ s_{1,0} & s_{1,1} & s_{1,2} & s_{1,3} \\ s_{2,0} & s_{2,1} & s_{2,2} & s_{2,3} \\ s_{3,0} & s_{3,1} & s_{3,2} & s_{3,3} \end{bmatrix} \]

注：加密算法中的列混合矩阵中参数最大为$0x03$，具体实现时至多采用三次运算（两次异或和一次移位）即可完成$3 \cdot a$，但是在解密时可能采用的计算就比较复杂（$0x0E$），这是因为在工程实践中，加密比解密更加常用，例如，$CTF$和$OFB$工作模式中，只用到加密算法；分组密码作为部件去构造杂凑函数或消息认证码时，大多数情况下只用到加密算法……

4. 轮密钥加

轮密钥加是$128-bit$的状态直接和$128-bit$的轮密钥进行逐比特异或运算，如下图所示：

flowchart TD%% 简化的矩阵表示subgraph InputState[输入状态矩阵]A[4×4字节矩阵 X₀₀ X₀₁ X₀₂ X₀₃ X₁₀ X₁₁ X₁₂ X₁₃ X₂₀ X₂₁ X₂₂ X₂₃ X₃₀ X₃₁ X₃₂ X₃₃]endsubgraph InputKey[轮密钥矩阵]K[4×4字节矩阵 K₀₀ K₀₁ K₀₂ K₀₃ K₁₀ K₁₁ K₁₂ K₁₃ K₂₀ K₂₁ K₂₂ K₂₃ K₃₀ K₃₁ K₃₂ K₃₃]endOp[轮密钥加 AddRoundKey 逐字节异或操作]subgraph OutputState[输出状态矩阵]R[4×4字节矩阵 R₀₀ R₀₁ R₀₂ R₀₃ R₁₀ R₁₁ R₁₂ R₁₃ R₂₀ R₂₁ R₂₂ R₂₃ R₃₀ R₃₁ R₃₂ R₃₃]endInputState --> OpInputKey --> OpOp --> OutputState

5. 密钥扩展

由于$AES-128/192/1256$在密钥扩展中的流程是一致的，但是由于迭代次数不一致，所以扩展出的密钥长度并不一致。但其中的思想是一致的。我们在这里介绍的是$AES-128$，我们输入的$key(16-Byte)$，这里我们规定其中的密钥矩阵每一列的$4-Byte$为一个字，起初的四个字会被当成主密钥进行扩展，最终扩展出来的为长度为$44-字$的密钥，其中每$4-字$参与每轮的轮密钥加操作，其中前四个字会在迭代前与明文进行异或。

扩展规则：

设主密钥为$w[0],w[1],w[2],w[3]$，对$W$数组扩充$40$个新列，构造总共$44$列的扩展密钥数组。

$i$不是$4$的倍数
$w[i]=w[i-4] \oplus w[i-1]$
$i$是$4$的倍数
$w[i]=w[i-4] \oplus T(w[i-1])$

T函数

T函数由三部分组成：字循环、字节代换、轮常量异或

字循环：将字中的4个字节循环左移1个字节
[b₀, b₁, b₂, b₃] → [b₁, b₂, b₃, b₀]
字节代换：使用$S盒$进行字节代换
轮常量异或：与轮常量$Rcon[j]$进行异或
轮常量表：

轮数 j	Rcon[j]	轮数 j	Rcon[j]
1	01 00 00 00	6	20 00 00 00
2	02 00 00 00	7	40 00 00 00
3	04 00 00 00	8	80 00 00 00
4	08 00 00 00	9	1B 00 00 00
5	10 00 00 00	10	36 00 00 00

示例演示

初始密钥：3C A1 0B 21 57 F0 19 16 90 2E 13 80 AC C1 07 BD

初始W数组：

W[0] = 3C A1 0B 21
W[1] = 57 F0 19 16
W[2] = 90 2E 13 80
W[3] = AC C1 07 BD

计算第一轮子密钥（W[4] ~ W[7]）
W[4] 计算（$i = 4$，是$4$的倍数）

T(W[3])计算：
1. 字循环：AC C1 07 BD → C1 07 BD AC
2. 字节代换：C1 07 BD AC → 78 C5 7A 91
3. 轮常量异或：78 C5 7A 91 ⊕ 01 00 00 00 = 79 C5 7A 91W[4] = W[0] ⊕ T(W[3]) = 3C A1 0B 21 ⊕ 79 C5 7A 91 = 45 64 71 B0

W[5] 计算（$i = 5$，不是$4$的倍数）

W[5] = W[1] ⊕ W[4] = 57 F0 19 16 ⊕ 45 64 71 B0 = 12 94 68 A6

W[6] 计算（$i = 5$，不是$4$的倍数）

W[6] = W[2] ⊕ W[5] = 90 2E 13 80 ⊕ 12 94 68 A6 = 82 BA 7B 26

W[7] 计算（$i = 5$，不是$4$的倍数）

W[7] = W[3] ⊕ W[6] = AC C1 07 BD ⊕ 82 BA 7B 26 = 2E 7B 7C 9B

第一轮密钥结果：45 64 71 B0 12 94 68 A6 82 BA 7B 26 2E 7B 7C 9B

三、加密 and 解密流程

flowchart TDsubgraph KeyGeneration[密钥扩展 Key Expansion]direction LRMasterKey[128位主密钥 Master Key] --> KeyExpansion[密钥扩展算法 Key Expansion Algorithm]KeyExpansion --> K0[轮密钥 K0]KeyExpansion --> K1[轮密钥 K1]KeyExpansion --> Kdots[...]KeyExpansion --> K9[轮密钥 K9]KeyExpansion --> K10[轮密钥 K10]endP[128位明文 Plaintext] --> AddRoundKey0[轮密钥加 AddRoundKey]AddRoundKey0 --> Round1[第1轮 Round 1]subgraph Round1[第1轮 Round 1]R1_SubBytes[S盒字节替换 SubBytes] --> R1_ShiftRows[行移位 ShiftRows] --> R1_MixColumns[列混合 MixColumns] --> R1_AddRoundKey[轮密钥加 AddRoundKey]endR1_AddRoundKey --> Rounds2to9[第2至9轮 Rounds 2-9]subgraph Rounds2to9[第2至9轮 Rounds 2-9]R2_9_SubBytes[S盒字节替换 SubBytes] --> R2_9_ShiftRows[行移位 ShiftRows] --> R2_9_MixColumns[列混合 MixColumns] --> R2_9_AddRoundKey[轮密钥加 AddRoundKey]endR2_9_AddRoundKey --> FinalRound[最终轮 Final Round]subgraph FinalRound[最终轮 Final Round]FR_SubBytes[S盒字节替换 SubBytes] --> FR_ShiftRows[行移位 ShiftRows] --> FR_AddRoundKey[轮密钥加 AddRoundKey]endFR_AddRoundKey --> C[128位密文 Ciphertext]C --> AddRoundKey10_Dec[轮密钥加 AddRoundKey]AddRoundKey10_Dec --> InvShiftRows10[逆行移位 InvShiftRows] --> InvSubBytes10[逆S盒字节替换 InvSubBytes] --> AddRoundKey9_Dec[轮密钥加 AddRoundKey]AddRoundKey9_Dec --> InvMixColumns9[逆列混合 InvMixColumns] --> InvShiftRows9[逆行移位 InvShiftRows] --> InvSubBytes9[逆S盒字节替换 InvSubBytes] --> AddRoundKey8_Dec[轮密钥加 AddRoundKey]AddRoundKey8_Dec --> Rounds8to2_Dec[第8至2轮解密 Rounds 8-2 Decryption]subgraph Rounds8to2_Dec[第8至2轮解密 Rounds 8-2 Decryption]R8_2_InvMixColumns[逆列混合 InvMixColumns] --> R8_2_InvShiftRows[逆行移位 InvShiftRows] --> R8_2_InvSubBytes[逆S盒字节替换 InvSubBytes] --> R8_2_AddRoundKey[轮密钥加 AddRoundKey]endR8_2_AddRoundKey --> FinalDecRound[第1轮解密 Round 1 Decryption]subgraph FinalDecRound[第1轮解密 Round 1 Decryption]FDR_InvMixColumns[逆列混合 InvMixColumns] --> FDR_InvShiftRows[逆行移位 InvShiftRows] --> FDR_InvSubBytes[逆S盒字节替换 InvSubBytes] --> AddRoundKey0_Dec[轮密钥加 AddRoundKey]endAddRoundKey0_Dec --> P_Dec[128位明文 Plaintext]K0 --> AddRoundKey0K1 --> R1_AddRoundKeyK9 --> R2_9_AddRoundKeyK10 --> FR_AddRoundKeyK10 --> AddRoundKey10_DecK9 --> AddRoundKey9_DecK1 --> R8_2_AddRoundKeyK0 --> AddRoundKey0_Dec

注：其中解密的流程并不固定，其中针对于每一轮中的逆组件使用，逆行移位操作与逆$S盒$操作可以调换先后顺序。

四、AES加密 and 解密代码实现

声明：为了适应大多数人的需求，减少重复知识的冗余。我们将对$AES-128$进行编码。其实针对于目前主流的编程语言而言，都已经有对应的库进行了支持。但是这避免不了我们会有使用$AES$源码的需求。便于博客管理以及避免文章篇幅很长，在这里只写下参照上述流程基本实现的主流语言编程下的加密与解密代码，针对于课程需要，还会有很多软件实现策略和优化策略，我们放在后面的文章中详细介绍，例如调用AESNI指令、T表法优化等软件实现的优化策略。

C/C++

/** File Name: AES_test.cpp* Author: chen_xing*/
#include <iostream>
#include <vector>
#include <iomanip>
#include <sstream>
#include <cstdint>
#include <algorithm>
#include <stdexcept>
using namespace std;class AES
{
private:static constexpr uint8_t Rcon[14] = {0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x1B, 0x36, 0x6C, 0xD8, 0xAB, 0x4D};vector<uint8_t> key;vector<vector<uint8_t>> W;vector<uint8_t> S, S_inv;int rounds, nk;// GF(2^8)乘法uint8_t _gmul(uint8_t a, uint8_t b){uint8_t p = 0;for (int i = 0; i < 8; ++i){if (b & 1)p ^= a;bool hi = a & 0x80;a <<= 1;if (hi)a ^= 0x1B;b >>= 1;}return p;}// 向量异或vector<uint8_t> _xor_vec(const vector<uint8_t> &a, const vector<uint8_t> &b){vector<uint8_t> res(a.size());for (size_t i = 0; i < a.size(); ++i)res[i] = a[i] ^ b[i];return res;}// 字节转矩阵vector<vector<uint8_t>> _bytes_to_matrix(const vector<uint8_t> &text){vector<vector<uint8_t>> m(4, vector<uint8_t>(4));for (int i = 0; i < 16; i++)m[i % 4][i / 4] = text[i];return m;}// 矩阵转字节vector<uint8_t> _matrix_to_bytes(const vector<vector<uint8_t>> &m){vector<uint8_t> res(16);for (int i = 0; i < 16; i++)res[i] = m[i % 4][i / 4];return res;}// 字循环vector<uint8_t> _rot_word(vector<uint8_t> w){rotate(w.begin(), w.begin() + 1, w.end());return w;}// 字替换vector<uint8_t> _sub_word(vector<uint8_t> w){for (auto &x : w)x = S[x];return w;}// 生成S盒void _generate_sbox(){S.assign(256, 0);S[0] = 0x63;uint8_t p = 1, q = 1;for (int i = 0; i < 255; ++i){p = p ^ (p << 1) ^ ((p & 0x80) ? 0x1B : 0);q ^= q << 1;q ^= q << 2;q ^= q << 4;q ^= (q & 0x80) ? 0x09 : 0x00;uint8_t xformed = q ^ ((q << 1) | (q >> 7)) ^((q << 2) | (q >> 6)) ^((q << 3) | (q >> 5)) ^((q << 4) | (q >> 4)) ^ 0x63;S[p] = xformed;}}// 生成逆S盒void _generate_sinvbox(){S_inv.assign(256, 0);for (int i = 0; i < 256; ++i)S_inv[S[i]] = i;}// 密钥扩展void _key_expansion(){for (int i = nk; i < (rounds + 1) * 4; ++i){vector<uint8_t> temp = W[i - 1];if (i % nk == 0){temp = _sub_word(_rot_word(temp));temp[0] ^= Rcon[i / nk - 1];}else if (nk == 8 && i % nk == 4){temp = _sub_word(temp);}W.push_back(_xor_vec(W[i - nk], temp));}}// 轮密钥加vector<vector<uint8_t>> _round_key_add(vector<vector<uint8_t>> &block, int round){for (int c = 0; c < 4; c++)for (int r = 0; r < 4; r++)block[r][c] ^= W[round * 4 + c][r];return block;}// 字节替换vector<vector<uint8_t>> _sub_bytes(vector<vector<uint8_t>> &block){for (auto &row : block)for (auto &b : row)b = S[b];return block;}// 行移位vector<vector<uint8_t>> _shift_rows(vector<vector<uint8_t>> &block){for (int r = 1; r < 4; r++)rotate(block[r].begin(), block[r].begin() + r, block[r].end());return block;}// 列混合vector<vector<uint8_t>> _mix_columns(vector<vector<uint8_t>> &s){for (int c = 0; c < 4; c++){uint8_t a0 = s[0][c], a1 = s[1][c], a2 = s[2][c], a3 = s[3][c];s[0][c] = _gmul(a0, 2) ^ _gmul(a1, 3) ^ a2 ^ a3;s[1][c] = a0 ^ _gmul(a1, 2) ^ _gmul(a2, 3) ^ a3;s[2][c] = a0 ^ a1 ^ _gmul(a2, 2) ^ _gmul(a3, 3);s[3][c] = _gmul(a0, 3) ^ a1 ^ a2 ^ _gmul(a3, 2);}return s;}// 逆字节替换vector<vector<uint8_t>> _inv_sub_bytes(vector<vector<uint8_t>> &block){for (auto &row : block)for (auto &b : row)b = S_inv[b];return block;}// 逆行移位vector<vector<uint8_t>> _inv_shift_rows(vector<vector<uint8_t>> &block){for (int r = 1; r < 4; r++)rotate(block[r].begin(), block[r].begin() + (4 - r), block[r].end());return block;}// 逆列混合vector<vector<uint8_t>> _inv_mix_columns(vector<vector<uint8_t>> &s){for (int c = 0; c < 4; c++){uint8_t a0 = s[0][c], a1 = s[1][c], a2 = s[2][c], a3 = s[3][c];s[0][c] = _gmul(a0, 14) ^ _gmul(a1, 11) ^ _gmul(a2, 13) ^ _gmul(a3, 9);s[1][c] = _gmul(a0, 9) ^ _gmul(a1, 14) ^ _gmul(a2, 11) ^ _gmul(a3, 13);s[2][c] = _gmul(a0, 13) ^ _gmul(a1, 9) ^ _gmul(a2, 14) ^ _gmul(a3, 11);s[3][c] = _gmul(a0, 11) ^ _gmul(a1, 13) ^ _gmul(a2, 9) ^ _gmul(a3, 14);}return s;}public:AES(const vector<uint8_t> &key_){key = key_;size_t len = key.size();if (len == 16){rounds = 10;nk = 4;}else if (len == 24){rounds = 12;nk = 6;}else if (len == 32){rounds = 14;nk = 8;}elsethrow invalid_argument("Invalid AES key length");_generate_sbox();_generate_sinvbox();// 初始化密钥扩展for (size_t i = 0; i < len; i += 4)W.push_back(vector<uint8_t>(key.begin() + i, key.begin() + i + 4));_key_expansion();}// PKCS7 填充vector<uint8_t> pad(const vector<uint8_t> &data){size_t pad_len = 16 - (data.size() % 16);vector<uint8_t> res = data;res.insert(res.end(), pad_len, static_cast<uint8_t>(pad_len));return res;}// 去除 PKCS7 填充vector<uint8_t> unpad(const vector<uint8_t> &data){if (data.empty() || data.size() % 16 != 0)throw runtime_error("Invalid data length for unpad");uint8_t pad_len = data.back();if (pad_len == 0 || pad_len > 16)throw runtime_error("Invalid padding");for (size_t i = data.size() - pad_len; i < data.size(); ++i)if (data[i] != pad_len)throw runtime_error("Bad padding byte");return vector<uint8_t>(data.begin(), data.end() - pad_len);}vector<uint8_t> encrypt(const vector<uint8_t> &plaintext){vector<uint8_t> data = pad(plaintext);vector<uint8_t> out;for (size_t i = 0; i < data.size(); i += 16){auto block = vector<uint8_t>(data.begin() + i, data.begin() + i + 16);auto state = _bytes_to_matrix(block);// 初始轮密钥加state = _round_key_add(state, 0);// 主轮for (int r = 1; r < rounds; ++r){state = _sub_bytes(state);state = _shift_rows(state);state = _mix_columns(state);state = _round_key_add(state, r);}// 最终轮state = _sub_bytes(state);state = _shift_rows(state);state = _round_key_add(state, rounds);auto encrypted_block = _matrix_to_bytes(state);out.insert(out.end(), encrypted_block.begin(), encrypted_block.end());}return out;}vector<uint8_t> decrypt(const vector<uint8_t> &ciphertext){if (ciphertext.size() % 16 != 0)throw invalid_argument("Ciphertext length must be multiple of 16");vector<uint8_t> out;for (size_t i = 0; i < ciphertext.size(); i += 16){auto block = vector<uint8_t>(ciphertext.begin() + i, ciphertext.begin() + i + 16);auto state = _bytes_to_matrix(block);// 初始轮state = _round_key_add(state, rounds);state = _inv_shift_rows(state);state = _inv_sub_bytes(state);// 主轮for (int r = rounds - 1; r > 0; --r){state = _round_key_add(state, r);state = _inv_mix_columns(state);state = _inv_shift_rows(state);state = _inv_sub_bytes(state);}// 最终轮state = _round_key_add(state, 0);auto decrypted_block = _matrix_to_bytes(state);out.insert(out.end(), decrypted_block.begin(), decrypted_block.end());}return unpad(out);}
};int main()
{string msg = "He who conquers others is strong; he who conquers himself is mighty.";vector<uint8_t> data(msg.begin(), msg.end());// key = chenxing_AES_c++vector<uint8_t> key = {'c', 'h', 'e', 'n', 'x', 'i', 'n', 'g', '_', 'A', 'E', 'S', '_', 'c', '+', '+'};AES aes(key);// 加密auto enc = aes.encrypt(data);cout << "Encrypted (hex): ";for (auto c : enc)cout << hex << setw(2) << setfill('0') << (int)c;cout << dec << endl;// 解密auto dec = aes.decrypt(enc);cout << "Decrypted: " << string(dec.begin(), dec.end()) << endl;// 验证cout << "Match: " << (msg == string(dec.begin(), dec.end())) << endl;return 0;
}

Python

class AES():Rcon = [0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x1B, 0x36, 0x6C, 0xD8, 0xAB, 0x4D]def __init__(self, key: bytes):key_length = len(key)if key_length == 16:  # 128位self.rounds = 10self.nk = 4  # 密钥字数elif key_length == 24:  # 192位self.rounds = 12self.nk = 6elif key_length == 32:  # 256位self.rounds = 14self.nk = 8else:raise ValueError(f"Invalid AES key length: {key_length} bytes")self.key = keyself.S = self._generate_sbox()self.S_inv = self._generate_sinvbox()self.W = [list(key[i:i + 4]) for i in range(0, len(key), 4)]self._key_expansion()def _xor(self, a, b=None):if b is None:assert len(a) > 0return a[0] ^ self._xor(a[1:]) if len(a) > 1 else a[0]assert len(a) == len(b)return [x ^ y for x, y in zip(a, b)]def _gmul(self, a, b):p = 0while b:if b & 1:p ^= aa = a << 1if a >> 8:a ^= 0x11B  # AES不可约多项式b >>= 1return pdef _multiply(self, a, b):return self._xor([self._gmul(x, y) for x, y in zip(a, b)])def _matrix_multiply(self, const, state):result = [[0] * 4 for _ in range(4)]for i in range(4):for j in range(4):for k in range(4):result[i][j] ^= self._gmul(const[i][k], state[k][j])return resultdef _permutation(self, lis, table):return [table[i] for i in lis]def _block_permutation(self, block, table):return [[table[block[i][j]] for j in range(4)] for i in range(4)]def _left_shift(self, block, n):return block[n:] + block[:n]def _rot_word(self, word):return word[1:] + word[:1]def _sub_word(self, word):return [self.S[b] for b in word]def _bytes_to_matrix(self, text: bytes) -> list[list[int]]:return [[text[j * 4 + i] for j in range(4)] for i in range(4)]def _matrix_to_bytes(self, block: list[list[int]]) -> bytes:return bytes([block[j][i] for i in range(4) for j in range(4)])def _generate_sbox(self):S = [0x63] + [0] * 255r = lambda x, s: (x << s | x >> 8 - s) % 256p, q = 1, 1for _ in range(255):p = (p ^ (p * 2) ^ [27, 0][p < 128]) % 256q ^= q * 2q ^= q * 4q ^= q * 16q &= 255q ^= [9, 0][q < 128]S[p] = q ^ r(q, 1) ^ r(q, 2) ^ r(q, 3) ^ r(q, 4) ^ 99return Sdef _generate_sinvbox(self):S_inv = [0] * 256for i in range(256):S_inv[self.S[i]] = ireturn S_invdef _key_expansion(self):for i in range(self.nk, (self.rounds + 1) * 4):temp = self.W[i - 1].copy()if i % self.nk == 0:temp = self._sub_word(self._rot_word(temp))temp[0] ^= self.Rcon[i // self.nk - 1]elif self.nk == 8 and i % self.nk == 4:temp = self._sub_word(temp)self.W.append(self._xor(self.W[i - self.nk], temp))def _row_shift(self, block: list[list[int]]) -> list[list[int]]:return [self._left_shift(block[i], i) for i in range(4)]def _inv_row_shift(self, block: list[list[int]]) -> list[list[int]]:return [self._left_shift(block[i], 4 - i) for i in range(4)]def _column_mix(self, block: list[list[int]]) -> list[list[int]]:return self._matrix_multiply([self._left_shift([2, 3, 1, 1], 4 - i) for i in range(4)], block)def _inv_column_mix(self, block: list[list[int]]) -> list[list[int]]:return self._matrix_multiply([self._left_shift([14, 11, 13, 0x9], 4 - i) for i in range(4)], block)def _round_key_add(self, block: list[list[int]], key: list[list[int]]) -> list[list[int]]:return [self._xor(block[i], [key[j][i] for j in range(4)]) for i in range(4)]def _encrypt(self, block: list[list[int]]) -> list[list[int]]:block = self._round_key_add(block, [self.W[i] for i in range(4)])for i in range(1, self.rounds):block = self._block_permutation(block, self.S)block = self._row_shift(block)block = self._column_mix(block)block = self._round_key_add(block, [self.W[i * 4 + j] for j in range(4)])block = self._block_permutation(block, self.S)block = self._row_shift(block)block = self._round_key_add(block, [self.W[i] for i in range(self.rounds * 4, (self.rounds + 1) * 4)])return blockdef _decrypt(self, block: list[list[int]]) -> list[list[int]]:block = self._round_key_add(block, [self.W[i] for i in range(self.rounds * 4, (self.rounds + 1) * 4)])for i in range(self.rounds - 1, 0, -1):block = self._inv_row_shift(block)block = self._block_permutation(block, self.S_inv)block = self._round_key_add(block, [self.W[i * 4 + j] for j in range(4)])block = self._inv_column_mix(block)block = self._inv_row_shift(block)block = self._block_permutation(block, self.S_inv)block = self._round_key_add(block, [self.W[i] for i in range(4)])return blockdef encrypt(self, plaintext: bytes) -> bytes:assert len(plaintext) % 16 == 0, ValueError(f"Incorrect AES plaintext length ({len(plaintext)} bytes)")ciphertext = b''for i in range(0, len(plaintext), 16):block = plaintext[i:i + 16]block = self._bytes_to_matrix(block)block = self._encrypt(block)ciphertext += self._matrix_to_bytes(block) return ciphertextdef decrypt(self, ciphertext: bytes) -> bytes:assert len(ciphertext) % 16 == 0, ValueError(f"Incorrect AES ciphertext length ({len(ciphertext)} bytes)")plaintext = b''for i in range(0, len(ciphertext), 16):block = ciphertext[i:i + 16]block = self._bytes_to_matrix(block)block = self._decrypt(block)plaintext += self._matrix_to_bytes(block)return plaintextif __name__ == "__main__":key = b'chen_xing_AES_py'aes = AES(key)# 胜人者有力，自强者胜。test_plaintext = b'He who conquers others is strong; he who conquers himself is mighty.'# 填充到16字节if len(test_plaintext) % 16 != 0:test_plaintext = test_plaintext.ljust(16 * ((len(test_plaintext) // 16) + 1), b'\x00')encrypted = aes.encrypt(test_plaintext)decrypted = aes.decrypt(encrypted)print(f"Decrypted: {decrypted}")print(f"Test - Match: {test_plaintext == decrypted}")

Java

import java.util.Arrays;public class AES {private static final int[] RCON = {0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x1B, 0x36, 0x6C, 0xD8, 0xAB, 0x4D};private final int Nk;        // 密钥字数private final int Nr;        // 轮数private final int Nb = 4;    // 状态矩阵列数private final byte[] key;    // 原始密钥private final int[][] w;     // 扩展密钥private final byte[] S = new byte[256];     // S盒private final byte[] S_INV = new byte[256]; // 逆S盒public AES(byte[] key) {// 根据密钥长度确定参数int len = key.length;if (len == 16) {Nk = 4;Nr = 10;} else if (len == 24) {Nk = 6;Nr = 12;} else if (len == 32) {Nk = 8;Nr = 14;} else {throw new IllegalArgumentException("Invalid AES key length: " + len);}this.key = Arrays.copyOf(key, key.length);generateSBox();generateSInvBox();// 密钥扩展：总字数 = Nb * (Nr + 1)int totalWords = Nb * (Nr + 1);w = new int[totalWords][4];keyExpansion();}// ---------- GF(2^8) 运算辅助函数 ----------/*** 在GF(2^8)中乘以x（即2）*/private static int xtime(int a) {a <<= 1;if ((a & 0x100) != 0) {a ^= 0x11b; // AES不可约多项式}return a & 0xff;}/*** 在GF(2^8)中乘法运算*/private static int mul(int a, int b) {int res = 0;while (b != 0) {if ((b & 1) != 0) {res ^= a;}a = xtime(a);b >>>= 1;}return res & 0xff;}// ---------- S盒生成 ----------/*** 生成AES S盒*/private void generateSBox() {// 使用指数运算 a^254 在GF(2^8)中计算乘法逆元S[0] = 0x63;for (int i = 1; i < 256; i++) {int inv = gfInv(i);int x = inv;// 仿射变换int y = x ^ ((x << 1) | (x >>> 7))^ ((x << 2) | (x >>> 6))^ ((x << 3) | (x >>> 5))^ ((x << 4) | (x >>> 4))^ 0x63;S[i] = (byte) (y & 0xff);}}/*** 生成逆S盒*/private void generateSInvBox() {for (int i = 0; i < 256; i++) {S_INV[S[i] & 0xFF] = (byte) i;}}/*** 在GF(2^8)中计算乘法逆元*/private int gfInv(int a) {if (a == 0) return 0;int result = 1;int base = a;int exp = 254; // a^254 是逆元while (exp > 0) {if ((exp & 1) != 0) {result = mul(result, base);}base = mul(base, base);exp >>= 1;}return result & 0xff;}// ---------- 密钥扩展 ----------/*** AES密钥扩展算法*/private void keyExpansion() {// 用原始密钥填充前Nk个字for (int i = 0; i < Nk; i++) {for (int j = 0; j < 4; j++) {w[i][j] = key[4 * i + j] & 0xFF;}}// 扩展剩余的字for (int i = Nk; i < w.length; i++) {int[] temp = Arrays.copyOf(w[i - 1], 4);if (i % Nk == 0) {temp = subWord(rotWord(temp));temp[0] ^= RCON[i / Nk - 1];} else if (Nk > 6 && (i % Nk) == 4) {temp = subWord(temp);}for (int j = 0; j < 4; j++) {w[i][j] = w[i - Nk][j] ^ temp[j];}}}/*** 字循环：将字向左循环移位*/private int[] rotWord(int[] word) {return new int[]{word[1], word[2], word[3], word[0]};}/*** 字替换：使用S盒替换字中的每个字节*/private int[] subWord(int[] word) {int[] out = new int[4];for (int i = 0; i < 4; i++) {out[i] = S[word[i]] & 0xFF;}return out;}// ---------- 状态矩阵辅助函数 ----------/*** 将字节数组转换为状态矩阵*/private int[][] bytesToState(byte[] in, int offset) {int[][] state = new int[4][4];for (int i = 0; i < 16; i++) {state[i % 4][i / 4] = in[offset + i] & 0xFF;}return state;}/*** 将状态矩阵转换为字节数组*/private void stateToBytes(int[][] state, byte[] out, int offset) {for (int i = 0; i < 16; i++) {out[offset + i] = (byte) (state[i % 4][i / 4]);}}// ---------- 核心变换操作 ----------/*** 字节替换*/private void subBytes(int[][] state) {for (int row = 0; row < 4; row++) {for (int col = 0; col < 4; col++) {state[row][col] = S[state[row][col]] & 0xff;}}}/*** 逆字节替换*/private void invSubBytes(int[][] state) {for (int row = 0; row < 4; row++) {for (int col = 0; col < 4; col++) {state[row][col] = S_INV[state[row][col]] & 0xff;}}}/*** 行移位*/private void shiftRows(int[][] state) {for (int row = 1; row < 4; row++) {int[] temp = Arrays.copyOf(state[row], 4);for (int col = 0; col < 4; col++) {state[row][col] = temp[(col + row) % 4];}}}/*** 逆行移位*/private void invShiftRows(int[][] state) {for (int row = 1; row < 4; row++) {int[] temp = Arrays.copyOf(state[row], 4);for (int col = 0; col < 4; col++) {state[row][(col + row) % 4] = temp[col];}}}/*** 列混合*/private void mixColumns(int[][] state) {for (int col = 0; col < 4; col++) {int a0 = state[0][col];int a1 = state[1][col];int a2 = state[2][col];int a3 = state[3][col];state[0][col] = (mul(2, a0) ^ mul(3, a1) ^ a2 ^ a3) & 0xff;state[1][col] = (a0 ^ mul(2, a1) ^ mul(3, a2) ^ a3) & 0xff;state[2][col] = (a0 ^ a1 ^ mul(2, a2) ^ mul(3, a3)) & 0xff;state[3][col] = (mul(3, a0) ^ a1 ^ a2 ^ mul(2, a3)) & 0xff;}}/*** 逆列混合*/private void invMixColumns(int[][] state) {for (int col = 0; col < 4; col++) {int a0 = state[0][col];int a1 = state[1][col];int a2 = state[2][col];int a3 = state[3][col];state[0][col] = (mul(0x0e, a0) ^ mul(0x0b, a1) ^ mul(0x0d, a2) ^ mul(0x09, a3)) & 0xff;state[1][col] = (mul(0x09, a0) ^ mul(0x0e, a1) ^ mul(0x0b, a2) ^ mul(0x0d, a3)) & 0xff;state[2][col] = (mul(0x0d, a0) ^ mul(0x09, a1) ^ mul(0x0e, a2) ^ mul(0x0b, a3)) & 0xff;state[3][col] = (mul(0x0b, a0) ^ mul(0x0d, a1) ^ mul(0x09, a2) ^ mul(0x0e, a3)) & 0xff;}}/*** 轮密钥加*/private void addRoundKey(int[][] state, int round) {for (int col = 0; col < 4; col++) {for (int row = 0; row < 4; row++) {state[row][col] ^= w[round * 4 + col][row];}}}// ---------- 单块加密/解密 ----------/*** 加密单个16字节块*/public byte[] encryptBlock(byte[] inputBlock) {if (inputBlock.length != 16) {throw new IllegalArgumentException("Block size must be 16 bytes");}int[][] state = bytesToState(inputBlock, 0);// 初始轮密钥加addRoundKey(state, 0);// 主轮（前Nr-1轮）for (int round = 1; round < Nr; round++) {subBytes(state);shiftRows(state);mixColumns(state);addRoundKey(state, round);}// 最终轮（无列混合）subBytes(state);shiftRows(state);addRoundKey(state, Nr);byte[] output = new byte[16];stateToBytes(state, output, 0);return output;}/*** 解密单个16字节块*/public byte[] decryptBlock(byte[] inputBlock) {if (inputBlock.length != 16) {throw new IllegalArgumentException("Block size must be 16 bytes");}int[][] state = bytesToState(inputBlock, 0);// 初始轮addRoundKey(state, Nr);invShiftRows(state);invSubBytes(state);// 主轮（前Nr-1轮）for (int round = Nr - 1; round > 0; round--) {addRoundKey(state, round);invMixColumns(state);invShiftRows(state);invSubBytes(state);}// 最终轮addRoundKey(state, 0);byte[] output = new byte[16];stateToBytes(state, output, 0);return output;}// ---------- PKCS#7 填充 ----------/*** PKCS#7填充*/private byte[] pkcs7Pad(byte[] data) {int padLength = 16 - (data.length % 16);if (padLength == 0) {padLength = 16;}byte[] padded = Arrays.copyOf(data, data.length + padLength);Arrays.fill(padded, data.length, padded.length, (byte) padLength);return padded;}/*** 去除PKCS#7填充*/private byte[] pkcs7Unpad(byte[] data) {if (data.length == 0 || data.length % 16 != 0) {throw new IllegalArgumentException("Invalid padded data length");}int paddingLength = data[data.length - 1] & 0xFF;if (paddingLength < 1 || paddingLength > 16) {throw new IllegalArgumentException("Invalid padding length");}// 验证填充字节for (int i = data.length - paddingLength; i < data.length; i++) {if ((data[i] & 0xFF) != paddingLength) {throw new IllegalArgumentException("Invalid padding bytes");}}return Arrays.copyOf(data, data.length - paddingLength);}// ---------- 多块加密/解密 (ECB模式) ----------/*** 加密任意长度数据*/public byte[] encrypt(byte[] plaintext) {byte[] paddedData = pkcs7Pad(plaintext);byte[] ciphertext = new byte[paddedData.length];for (int i = 0; i < paddedData.length; i += 16) {byte[] block = Arrays.copyOfRange(paddedData, i, i + 16);byte[] encryptedBlock = encryptBlock(block);System.arraycopy(encryptedBlock, 0, ciphertext, i, 16);}return ciphertext;}/*** 解密任意长度数据*/public byte[] decrypt(byte[] ciphertext) {if (ciphertext.length % 16 != 0) {throw new IllegalArgumentException("Ciphertext length must be multiple of 16 bytes");}byte[] decryptedData = new byte[ciphertext.length];for (int i = 0; i < ciphertext.length; i += 16) {byte[] block = Arrays.copyOfRange(ciphertext, i, i + 16);byte[] decryptedBlock = decryptBlock(block);System.arraycopy(decryptedBlock, 0, decryptedData, i, 16);}return pkcs7Unpad(decryptedData);}// ---------- 辅助函数 ----------/*** 将字节数组转换为十六进制字符串*/public static String bytesToHex(byte[] bytes) {StringBuilder hexString = new StringBuilder();for (byte b : bytes) {hexString.append(String.format("%02x", b & 0xFF));}return hexString.toString();}// ---------- 测试函数 ----------public static void main(String[] args) throws Exception {byte[] key = "chenxingAES_JAVA".getBytes("UTF-8");AES aes = new AES(key);String plainText = "He who conquers others is strong; he who conquers himself is mighty.";byte[] plaintextBytes = plainText.getBytes("UTF-8");// 加密byte[] ciphertext = aes.encrypt(plaintextBytes);System.out.println("Ciphertext (hex): " + bytesToHex(ciphertext));// 解密byte[] decryptedBytes = aes.decrypt(ciphertext);String decryptedText = new String(decryptedBytes, "UTF-8");System.out.println("Decrypted text: " + decryptedText);// 验证boolean isMatch = Arrays.equals(plaintextBytes, decryptedBytes);System.out.println("Match: " + isMatch);if (!isMatch) {throw new RuntimeException("Encryption/decryption mismatch!");}}
}

Rust

use std::convert::TryInto;struct AES {rounds: usize,nk: usize,w: Vec<[u8; 4]>,sbox: [u8; 256],inv_sbox: [u8; 256],
}impl AES {const RCON: [u8; 14] = [0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x1B, 0x36, 0x6C, 0xD8, 0xAB, 0x4D];pub fn new(key: &[u8]) -> Self {let (nk, rounds) = match key.len() {16 => (4, 10),24 => (6, 12),32 => (8, 14),_ => panic!("Invalid AES key length: {} bytes", key.len()),};let mut aes = AES {rounds,nk,w: Vec::new(),sbox: [0u8; 256],inv_sbox: [0u8; 256],};aes.generate_sbox();aes.generate_inv_sbox();aes.key_expansion(key);aes}/// 在GF(2^8)中乘法运算fn gmul(mut a: u8, mut b: u8) -> u8 {let mut product: u8 = 0;while b != 0 {if b & 1 != 0 {product ^= a;}let high_bit = a & 0x80;a <<= 1;if high_bit != 0 {a ^= 0x1b;}b >>= 1;}product}/// 在GF(2^8)中指数运算fn gf_pow(mut base: u8, mut exponent: u32) -> u8 {let mut result: u8 = 1;while exponent != 0 {if exponent & 1 != 0 {result = AES::gmul(result, base);}base = AES::gmul(base, base);exponent >>= 1;}result}/// 生成AES S盒fn generate_sbox(&mut self) {self.sbox[0] = 0x63;for i in 1..256 {let inv = if i == 0 { 0 } else { AES::gf_pow(i as u8, 254) };let x = inv;// 仿射变换let y = x ^ x.rotate_left(1) ^ x.rotate_left(2) ^ x.rotate_left(3) ^ x.rotate_left(4) ^ 0x63;self.sbox[i] = y;}}/// 生成逆S盒fn generate_inv_sbox(&mut self) {for i in 0..256 {self.inv_sbox[self.sbox[i] as usize] = i as u8;}}/// 字循环：将字向左循环移位fn rot_word(word: [u8; 4]) -> [u8; 4] {[word[1], word[2], word[3], word[0]]}/// 字替换：使用S盒替换字中的每个字节fn sub_word(&self, word: [u8; 4]) -> [u8; 4] {[self.sbox[word[0] as usize],self.sbox[word[1] as usize],self.sbox[word[2] as usize],self.sbox[word[3] as usize],]}/// AES密钥扩展算法fn key_expansion(&mut self, key: &[u8]) {let nb = 4; // 状态矩阵列数let total_words = nb * (self.rounds + 1);self.w = vec![[0u8; 4]; total_words];// 用原始密钥填充前Nk个字for i in 0..self.nk {self.w[i].copy_from_slice(&key[4 * i..4 * i + 4]);}// 扩展剩余的字for i in self.nk..total_words {let mut temp = self.w[i - 1];if i % self.nk == 0 {temp = Self::rot_word(temp);temp = self.sub_word(temp);temp[0] ^= Self::RCON[i / self.nk - 1];} else if self.nk > 6 && i % self.nk == 4 {temp = self.sub_word(temp);}for j in 0..4 {self.w[i][j] = self.w[i - self.nk][j] ^ temp[j];}}}/// 轮密钥加fn add_round_key(state: &mut [[u8; 4]; 4], expanded_key: &[[u8; 4]], round: usize) {for col in 0..4 {for row in 0..4 {state[row][col] ^= expanded_key[round * 4 + col][row];}}}/// 字节替换fn sub_bytes(&self, state: &mut [[u8; 4]; 4]) {for row in 0..4 {for col in 0..4 {state[row][col] = self.sbox[state[row][col] as usize];}}}/// 逆字节替换fn inv_sub_bytes(&self, state: &mut [[u8; 4]; 4]) {for row in 0..4 {for col in 0..4 {state[row][col] = self.inv_sbox[state[row][col] as usize];}}}/// 行移位fn shift_rows(&self, state: &mut [[u8; 4]; 4]) {for row in 1..4 {state[row].rotate_left(row);}}/// 逆行移位fn inv_shift_rows(&self, state: &mut [[u8; 4]; 4]) {for row in 1..4 {state[row].rotate_right(row);}}/// 单列混合fn mix_single_column(&self, column: [u8; 4]) -> [u8; 4] {[Self::gmul(2, column[0]) ^ Self::gmul(3, column[1]) ^ column[2] ^ column[3],column[0] ^ Self::gmul(2, column[1]) ^ Self::gmul(3, column[2]) ^ column[3],column[0] ^ column[1] ^ Self::gmul(2, column[2]) ^ Self::gmul(3, column[3]),Self::gmul(3, column[0]) ^ column[1] ^ column[2] ^ Self::gmul(2, column[3]),]}/// 列混合fn mix_columns(&self, state: &mut [[u8; 4]; 4]) {for col in 0..4 {let column = [state[0][col], state[1][col], state[2][col], state[3][col]];let mixed_column = self.mix_single_column(column);for row in 0..4 {state[row][col] = mixed_column[row];}}}/// 逆列混合fn inv_mix_columns(&self, state: &mut [[u8; 4]; 4]) {for col in 0..4 {let column = [state[0][col], state[1][col], state[2][col], state[3][col]];state[0][col] = Self::gmul(0x0e, column[0]) ^ Self::gmul(0x0b, column[1]) ^ Self::gmul(0x0d, column[2]) ^ Self::gmul(0x09, column[3]);state[1][col] = Self::gmul(0x09, column[0]) ^ Self::gmul(0x0e, column[1]) ^ Self::gmul(0x0b, column[2]) ^ Self::gmul(0x0d, column[3]);state[2][col] = Self::gmul(0x0d, column[0]) ^ Self::gmul(0x09, column[1]) ^ Self::gmul(0x0e, column[2]) ^ Self::gmul(0x0b, column[3]);state[3][col] = Self::gmul(0x0b, column[0]) ^ Self::gmul(0x0d, column[1]) ^ Self::gmul(0x09, column[2]) ^ Self::gmul(0x0e, column[3]);}}/// 将16字节块转换为4x4状态矩阵fn bytes_to_state(block: &[u8; 16]) -> [[u8; 4]; 4] {let mut state = [[0u8; 4]; 4];for i in 0..16 {state[i % 4][i / 4] = block[i];}state}/// 将4x4状态矩阵转换为16字节块fn state_to_bytes(state: &[[u8; 4]; 4]) -> [u8; 16] {let mut block = [0u8; 16];for i in 0..16 {block[i] = state[i % 4][i / 4];}block}/// 加密单个16字节块pub fn encrypt_block(&self, block: &[u8; 16]) -> [u8; 16] {let mut state = Self::bytes_to_state(block);// 初始轮密钥加Self::add_round_key(&mut state, &self.w, 0);// 主轮（前Nr-1轮）for round in 1..self.rounds {self.sub_bytes(&mut state);self.shift_rows(&mut state);self.mix_columns(&mut state);Self::add_round_key(&mut state, &self.w, round);}// 最终轮（无列混合）self.sub_bytes(&mut state);self.shift_rows(&mut state);Self::add_round_key(&mut state, &self.w, self.rounds);Self::state_to_bytes(&state)}/// 解密单个16字节块pub fn decrypt_block(&self, block: &[u8; 16]) -> [u8; 16] {let mut state = Self::bytes_to_state(block);// 初始轮Self::add_round_key(&mut state, &self.w, self.rounds);self.inv_shift_rows(&mut state);self.inv_sub_bytes(&mut state);// 主轮（前Nr-1轮）for round in (1..self.rounds).rev() {Self::add_round_key(&mut state, &self.w, round);self.inv_mix_columns(&mut state);self.inv_shift_rows(&mut state);self.inv_sub_bytes(&mut state);}// 最终轮Self::add_round_key(&mut state, &self.w, 0);Self::state_to_bytes(&state)}// ---------- PKCS7 填充辅助函数 ----------/// PKCS7填充fn pkcs7_pad(data: &[u8]) -> Vec<u8> {let padding_length = 16 - (data.len() % 16);let mut padded_data = Vec::with_capacity(data.len() + padding_length);padded_data.extend_from_slice(data);padded_data.extend(std::iter::repeat(padding_length as u8).take(padding_length));padded_data}/// 去除PKCS7填充fn pkcs7_unpad(data: &[u8]) -> Vec<u8> {if data.is_empty() || data.len() % 16 != 0 {panic!("Invalid padded data: length must be non-zero and multiple of 16");}let padding_length = data[data.len() - 1] as usize;if padding_length == 0 || padding_length > 16 {panic!("Invalid padding length: {}", padding_length);}// 验证所有填充字节for &byte in &data[data.len() - padding_length..] {if byte as usize != padding_length {panic!("Invalid padding bytes");}}data[..data.len() - padding_length].to_vec()}pub fn encrypt(&self, plaintext: &[u8]) -> Vec<u8> {let padded_data = Self::pkcs7_pad(plaintext);let mut ciphertext = Vec::with_capacity(padded_data.len());for chunk in padded_data.chunks(16) {let block: [u8; 16] = chunk.try_into().unwrap();ciphertext.extend_from_slice(&self.encrypt_block(&block));}ciphertext}pub fn decrypt(&self, ciphertext: &[u8]) -> Vec<u8> {if ciphertext.len() % 16 != 0 {panic!("Ciphertext length must be multiple of 16 bytes");}let mut decrypted_data = Vec::with_capacity(ciphertext.len());for chunk in ciphertext.chunks(16) {let block: [u8; 16] = chunk.try_into().unwrap();decrypted_data.extend_from_slice(&self.decrypt_block(&block));}Self::pkcs7_unpad(&decrypted_data)}
}/// 将字节数组转换为十六进制字符串
fn bytes_to_hex(bytes: &[u8]) -> String {bytes.iter().map(|byte| format!("{:02x}", byte)).collect::<Vec<String>>().join("")
}fn main() {let key = b"chenxingAES_Rust";let aes = AES::new(key);let plaintext = b"He who conquers others is strong; he who conquers himself is mighty.";// 加密let ciphertext = aes.encrypt(plaintext);println!("Ciphertext (hex): {}", bytes_to_hex(&ciphertext));// 解密let decrypted = aes.decrypt(&ciphertext);println!("Decrypted: {}", String::from_utf8_lossy(&decrypted));// 验证assert_eq!(plaintext, decrypted.as_slice());println!("Successfully!!!");
}#[cfg(test)]
mod tests {use super::*;#[test]fn test_aes_round_trip() {let key = b"chenxingAES_Rust";let aes = AES::new(key);let test_data = b"Test AES encryption and decryption";let encrypted = aes.encrypt(test_data);let decrypted = aes.decrypt(&encrypted);assert_eq!(test_data, decrypted.as_slice());}#[test]fn test_single_block() {let key = b"chenxingAES_Rust";let aes = AES::new(key);let block = [0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77,0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff];let encrypted = aes.encrypt_block(&block);let decrypted = aes.decrypt_block(&encrypted);assert_eq!(block, decrypted);}
}