当前位置: 首页 > news >正文

US$39 PowerBox for KTM JTAG for Hitachi

PowerBox for KTM JTAG for Hitachi

It is compatible in the automatic mode with the loading programs which use:
BOOT-OEM12, 12 pin OBD-II;
L-LINE, 15 pin OBD-II.
The Tool has built-in current limiting resistors on the following signal lines:
RESET — 510 Ω;
BOOT — 510 Ω;
CNF1 — 220 Ω.
The tool is fitted with multipurpose connectors which allow to establish the connections flexibly:
 
USB, designed for connecting to the computer. It is to be connected when the built-in USB — UART converter is enabled; for PowerBox software update; while reprogramming Renesas CPUs;
DC, designed for powering the built-in circuit as well as the connected ECU. It is recommended to use only quality units with 12V output voltage. While reading the password, when it is impossible in the vehicle, one must note that high-voltage converters in ECUs consume rather high current at the start which can trigger protection mechanism or even result in the power unit damage;
J2534 (OBD-II-F), designed for connecting the same name interface to OBD-II;
DB-15, designed for connecting to the main ECU connector. It is recommended to use 14P600KT02, 14P600KT03 cables or analogous ones;
IDC-26, designed for connecting directly to the ECU board or via the adapter to the special head. It is recommended to use 14P600KT06 cable or an analogous one for Tricore GPT.
It is recommended to use Flash Development Toolkit software for flashing Renesas CPUs.
Controls:
The tool has 3 switches for operating in different modes.
POWER, power control. The tool has three modes of power supply to the ECU: OFF allows to remove all power and control signals from IDC-26 and DB-15 connectors; MANUAL supplies power to VECU and VKEY terminals and to the control outputs depending on the chosen tactics; AUTO, automatic control, in this mode power is controlled by the loading program with L-Line signal (15 pin OBD-II).
BOOT, simultaneous control of BOOT, RESET and CNF1 signals (3.3V): OFF, allows to remove all control signals from DB-15 connector; MANUAL pulls RESET and BOOT to the signal minus, and CNF1 to +3.3V; AUTO, automatic control, in this mode BOOT, RESET and CNF1 signals are simultaneously controlled by the loading program (12 pin OBD-II, OEM12).
GPT, for Renesas and Tricore with GPT CPUs. It is necessary to use 5V while working with SH705x CPUs, in other cases 3.3V is to be used.

Lights:
LED near the 5V/3.3V switch indicates 5V or 3.3V voltage supply.
VECU, VKEY LED indicates VECU and VKEY voltage supply.
12V LED indicates power voltage.
BOOT LED indicates voltage on CNF1 output (the LED works both for input and output).

Package includes:

1pc x PowerBox for KTM JTAG for Hitachi

Pictures of PowerBox for KTM JTAG for Hitachi

PowerBox for KTM JTAG for HitachiPowerBox for KTM JTAG for HitachiPowerBox for KTM JTAG for HitachiPowerBox for KTM JTAG for HitachiPowerBox for KTM JTAG for HitachiPowerBox for KTM JTAG for HitachiPowerBox for KTM JTAG for HitachiPowerBox for KTM JTAG for HitachiPowerBox for KTM JTAG for Hitachi

PowerBox for KTM JTAG for Hitachi, now only need US$39, this price is valid within 1 week, If you need to buy PowerBox for KTM JTAG for Hitachi, go to https://www.chinaobd2.com/wholesale/powerbox-for-pcmflash-ktm-jtag-for-hitachi-6857.html.

http://www.hskmm.com/?act=detail&tid=22600

相关文章:

  • 最小二乘问题详解2:线性最小二乘求解
  • OpenAI炸场!Sora 2正式发布,它不只是个视频模型,更是一个社交宇宙!
  • 基于python资料挖据的教学监控系统的设计与应用
  • 2025防腐木厂家权威推荐榜:实力品牌与定制服务深度解析
  • 中间件详解与自定义 - 实践
  • 格林达姆 花——季护航2006年-2017年天朝纸媒资料备份(不全)
  • 【Groovy】变量和基本数据类型
  • 2026届模拟/射频IC设计方向保研经验分享
  • 2021 ICPC 沈阳 BEFHJLM(待补
  • Docker容器完全操控指南
  • 【Groovy】Groovy环境搭建
  • 2025年TAB拉链制造商权威推荐榜:创新设计与耐用品质口碑
  • 变量类型
  • 10.1
  • VMware Cloud Foundation 9.0.1.0 发布 - 领先的多云平台
  • velero 备份及使用方法
  • 洛谷月赛T1 P14081 「CZOI-R7」炸弹游戏
  • VMware NSX 4.2.3.1 发布,新增功能概览
  • Claude Code V2集成KAT-Coder
  • Ubuntu 软件源
  • Ceph 分布式存储学习笔记(一):介绍、部署与集群设置(上)
  • 数学学习总结
  • VMware Aria Suite Lifecycle 8.18 Patch 5 发布,新增功能概览
  • P3977 [TJOI2015] 棋盘题解
  • 03. 基本元素
  • 基础整理01:Bode图、PM、GM、极点零点 - 教程
  • [已解决]CUDA error: CUBLAS_STATUS_EXECUTION_FAILED when calling cublasSgemmStridedBatched
  • VMware vCenter Server 7.0U3w 发布 - 集中管理 vSphere 环境
  • VMware Aria Operations 8.18.5 发布,新增功能概览
  • VMware Aria Operations for Logs 8.18.5 发布,新增功能概览